DIY Outdoor privacy screen
When tech wiz AJ. Fox shared his idea and process for building a DIY privacy fence on Twitter I had to ask if he was willing to share. He gracious agreed. So all you folks who need to create your own little clothes free nook away from prying eyes read on.
I created the fence for privacy while allowing some sun through, I did not want to buy a standard fence panel as it would have been
Too high or too awkward to fit in, so i though pallets are good, slatted allowing sun through and just right height
The pallets are bolted to the wall, with 2 inch screws at 10mm rawl plug. 4 seemed enough. Pilot holes drilled into timber. Then these holes
Marked on to wall and then drill holes with 10mm masonry bit. I secured another half of a pallet at the end to create required…
View original post 35 more words